Файловый менеджер - Редактировать - /usr/src/linux-headers-5.4.0-200-generic/scripts/Kbuild.include
Назад
# SPDX-License-Identifier: GPL-2.0 #### # kbuild: Generic definitions # Convenient variables comma := , quote := " squote := ' empty := space := $(empty) $(empty) space_escape := _-_SPACE_-_ pound := \# ### # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o dot-target = $(dir $@).$(notdir $@) ### # The temporary file to save gcc -MD generated dependencies must not # contain a comma depfile = $(subst $(comma),_,$(dot-target).d) ### # filename of target with directory and extension stripped basetarget = $(basename $(notdir $@)) ### # real prerequisites without phony targets real-prereqs = $(filter-out $(PHONY), $^) ### # Escape single quote for use in echo statements escsq = $(subst $(squote),'\$(squote)',$1) ### # Easy method for doing a status message kecho := : quiet_kecho := echo silent_kecho := : kecho := $($(quiet)kecho) ### # filechk is used to check if the content of a generated file is updated. # Sample usage: # # filechk_sample = echo $(KERNELRELEASE) # version.h: FORCE # $(call filechk,sample) # # The rule defined shall write to stdout the content of the new file. # The existing file will be compared with the new one. # - If no file exist it is created # - If the content differ the new file is used # - If they are equal no change, and no timestamp update # - stdin is piped in from the first prerequisite ($<) so one has # to specify a valid file as first prerequisite (often the kbuild file) define filechk $(Q)set -e; \ mkdir -p $(dir $@); \ trap "rm -f $(dot-target).tmp" EXIT; \ { $(filechk_$(1)); } > $(dot-target).tmp; \ if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then \ $(kecho) ' UPD $@'; \ mv -f $(dot-target).tmp $@; \ fi endef ###### # gcc support functions # See documentation in Documentation/kbuild/makefiles.rst # cc-cross-prefix # Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-) # Return first <prefix> where a <prefix>gcc is found in PATH. # If no gcc found in PATH with listed prefixes return nothing # # Note: '2>/dev/null' is here to force Make to invoke a shell. Otherwise, it # would try to directly execute the shell builtin 'command'. This workaround # should be kept for a long time since this issue was fixed only after the # GNU Make 4.2.1 release. cc-cross-prefix = $(firstword $(foreach c, $(1), \ $(if $(shell command -v -- $(c)gcc 2>/dev/null), $(c)))) # output directory for tests below TMPOUT = $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_$$$$ # try-run # Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) # Exit code chooses option. "$$TMP" serves as a temporary file and is # automatically cleaned up. try-run = $(shell set -e; \ TMP=$(TMPOUT)/tmp; \ TMPO=$(TMPOUT)/tmp.o; \ mkdir -p $(TMPOUT); \ trap "rm -rf $(TMPOUT)" EXIT; \ if ($(1)) >/dev/null 2>&1; \ then echo "$(2)"; \ else echo "$(3)"; \ fi) # as-option # Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,) as-option = $(call try-run,\ $(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2)) # as-instr # Usage: cflags-y += $(call as-instr,instr,option1,option2) as-instr = $(call try-run,\ printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3)) # __cc-option # Usage: MY_CFLAGS += $(call __cc-option,$(CC),$(MY_CFLAGS),-march=winchip-c6,-march=i586) __cc-option = $(call try-run,\ $(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4)) # Do not attempt to build with gcc plugins during cc-option tests. # (And this uses delayed resolution so the flags will be up to date.) CC_OPTION_CFLAGS = $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS)) # cc-option # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) cc-option = $(call __cc-option, $(CC),\ $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS),$(1),$(2)) # cc-option-yn # Usage: flag := $(call cc-option-yn,-march=winchip-c6) cc-option-yn = $(call try-run,\ $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n) # cc-disable-warning # Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) cc-disable-warning = $(call try-run,\ $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) # cc-ifversion # Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) cc-ifversion = $(shell [ $(CONFIG_GCC_VERSION)0 $(1) $(2)000 ] && echo $(3) || echo $(4)) # ld-option # Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y) ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3)) # ld-version # Note this is mainly for HJ Lu's 3 number binutil versions ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh) # ld-ifversion # Usage: $(call ld-ifversion, -ge, 22252, y) ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4)) ###### ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= # Usage: # $(Q)$(MAKE) $(build)=dir build := -f $(srctree)/scripts/Makefile.build obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= # Usage: # $(Q)$(MAKE) $(modbuiltin)=dir modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj= # Usage: # $(Q)$(MAKE) $(dtbinst)=dir dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj= # Usage: # $(Q)$(MAKE) $(clean)=dir clean := -f $(srctree)/scripts/Makefile.clean obj # echo command. # Short version is used, if $(quiet) equals `quiet_', otherwise full one. echo-cmd = $(if $($(quiet)cmd_$(1)),\ echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) # sink stdout for 'make -s' redirect := quiet_redirect := silent_redirect := exec >/dev/null; # Delete the target on interruption # # GNU Make automatically deletes the target if it has already been changed by # the interrupted recipe. So, you can safely stop the build by Ctrl-C (Make # will delete incomplete targets), and resume it later. # # However, this does not work when the stderr is piped to another program, like # $ make >&2 | tee log # Make dies with SIGPIPE before cleaning the targets. # # To address it, we clean the target in signal traps. # # Make deletes the target when it catches SIGHUP, SIGINT, SIGQUIT, SIGTERM. # So, we cover them, and also SIGPIPE just in case. # # Of course, this is unneeded for phony targets. delete-on-interrupt = \ $(if $(filter-out $(PHONY), $@), \ $(foreach sig, HUP INT QUIT TERM PIPE, \ trap 'rm -f $@; trap - $(sig); kill -s $(sig) $$$$' $(sig);)) # printing commands cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(delete-on-interrupt) $(cmd_$(1)) ### # if_changed - execute command if any prerequisite is newer than # target, or command line has changed # if_changed_dep - as if_changed, but uses fixdep to reveal dependencies # including used config symbols # if_changed_rule - as if_changed but execute rule instead # See Documentation/kbuild/makefiles.rst for more info ifneq ($(KBUILD_NOCMDDEP),1) # Check if both commands are the same including their order. Result is empty # string if equal. User may override this check using make KBUILD_NOCMDDEP=1 cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \ $(subst $(space),$(space_escape),$(strip $(cmd_$1)))) else cmd-check = $(if $(strip $(cmd_$@)),,1) endif # Replace >$< with >$$< to preserve $ when reloading the .cmd file # (needed for make) # Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file # (needed for make) # Replace >'< with >'\''< to be able to enclose the whole string in '...' # (needed for the shell) make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1))))) # Find any prerequisites that is newer than target or that does not exist. # PHONY targets skipped in both cases. any-prereq = $(filter-out $(PHONY),$?)$(filter-out $(PHONY) $(wildcard $^),$^) # Execute command if command has changed or prerequisite(s) are updated. if_changed = $(if $(any-prereq)$(cmd-check), \ $(cmd); \ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:) # Execute the command and also postprocess generated .d dependencies file. if_changed_dep = $(if $(any-prereq)$(cmd-check),$(cmd_and_fixdep),@:) cmd_and_fixdep = \ $(cmd); \ scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\ rm -f $(depfile) # Usage: $(call if_changed_rule,foo) # Will check if $(cmd_foo) or any of the prerequisites changed, # and if so will execute $(rule_foo). if_changed_rule = $(if $(any-prereq)$(cmd-check),$(rule_$(1)),@:) ### # why - tell why a target got built # enabled by make V=2 # Output (listed in the order they are checked): # (1) - due to target is PHONY # (2) - due to target missing # (3) - due to: file1.h file2.h # (4) - due to command line change # (5) - due to missing .cmd file # (6) - due to target not in $(targets) # (1) PHONY targets are always build # (2) No target, so we better build it # (3) Prerequisite is newer than target # (4) The command line stored in the file named dir/.target.cmd # differed from actual command line. This happens when compiler # options changes # (5) No dir/.target.cmd file (used to store command line) # (6) No dir/.target.cmd file and target not listed in $(targets) # This is a good hint that there is a bug in the kbuild file ifeq ($(KBUILD_VERBOSE),2) why = \ $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ $(if $(wildcard $@), \ $(if $(any-prereq),- due to: $(any-prereq), \ $(if $(cmd-check), \ $(if $(cmd_$@),- due to command line change, \ $(if $(filter $@, $(targets)), \ - due to missing .cmd file, \ - due to $(notdir $@) not in $$(targets) \ ) \ ) \ ) \ ), \ - due to target missing \ ) \ ) echo-why = $(call escsq, $(strip $(why))) endif ############################################################################### # # When a Kconfig string contains a filename, it is suitable for # passing to shell commands. It is surrounded by double-quotes, and # any double-quotes or backslashes within it are escaped by # backslashes. # # This is no use for dependencies or $(wildcard). We need to strip the # surrounding quotes and the escaping from quotes and backslashes, and # we *do* need to escape any spaces in the string. So, for example: # # Usage: $(eval $(call config_filename,FOO)) # # Defines FOO_FILENAME based on the contents of the CONFIG_FOO option, # transformed as described above to be suitable for use within the # makefile. # # Also, if the filename is a relative filename and exists in the source # tree but not the build tree, define FOO_SRCPREFIX as $(srctree)/ to # be prefixed to *both* command invocation and dependencies. # # Note: We also print the filenames in the quiet_cmd_foo text, and # perhaps ought to have a version specially escaped for that purpose. # But it's only cosmetic, and $(patsubst "%",%,$(CONFIG_FOO)) is good # enough. It'll strip the quotes in the common case where there's no # space and it's a simple filename, and it'll retain the quotes when # there's a space. There are some esoteric cases in which it'll print # the wrong thing, but we don't really care. The actual dependencies # and commands *do* get it right, with various combinations of single # and double quotes, backslashes and spaces in the filenames. # ############################################################################### # define config_filename ifneq ($$(CONFIG_$(1)),"") $(1)_FILENAME := $$(subst \\,\,$$(subst \$$(quote),$$(quote),$$(subst $$(space_escape),\$$(space),$$(patsubst "%",%,$$(subst $$(space),$$(space_escape),$$(CONFIG_$(1))))))) ifneq ($$(patsubst /%,%,$$(firstword $$($(1)_FILENAME))),$$(firstword $$($(1)_FILENAME))) else ifeq ($$(wildcard $$($(1)_FILENAME)),) ifneq ($$(wildcard $$(srctree)/$$($(1)_FILENAME)),) $(1)_SRCPREFIX := $(srctree)/ endif endif endif endif endef # ############################################################################### # delete partially updated (i.e. corrupted) files on error .DELETE_ON_ERROR: # do not delete intermediate files automatically .SECONDARY:
| ver. 1.4 |
Github
|
.
| PHP 7.4.3-4ubuntu2.24 | Генерация страницы: 0.01 |
proxy
|
phpinfo
|
Настройка