Файловый менеджер

Файловый менеджер - Редактировать - /usr/src/linux-headers-5.4.0-200/arch/mips/include/asm/sibyte/bcm1480_regs.h

Назад
/* SPDX-License-Identifier: GPL-2.0-or-later / / ********************************************************************* * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package * * Register Definitions File: bcm1480_regs.h * * This module contains the addresses of the on-chip peripherals * on the BCM1280 and BCM1480. * * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) * ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. * ********************************************************************* / #ifndef _BCM1480_REGS_H #define _BCM1480_REGS_H #include <asm/sibyte/sb1250_defs.h> / ********************************************************************* * Pull in the BCM1250's registers since a great deal of the 1480's * functions are the same as the BCM1250. ********************************************************************* / #include <asm/sibyte/sb1250_regs.h> / ********************************************************************* * Some general notes: * * Register addresses are grouped by function and follow the order * of the User Manual. * * For the most part, when there is more than one peripheral * of the same type on the SOC, the constants below will be * offsets from the base of each peripheral. For example, * the MAC registers are described as offsets from the first * MAC register, and there will be a MAC_REGISTER() macro * to calculate the base address of a given MAC. * * The information in this file is based on the BCM1X55/BCM1X80 * User Manual, Document 1X55_1X80-UM100-R, 22/12/03. * * This file is basically a "what's new" header file. Since the * BCM1250 and the new BCM1480 (and derivatives) share many common * features, this file contains only what's new or changed from * the 1250. (above, you can see that we include the 1250 symbols * to get the base functionality). * * In software, be sure to use the correct symbols, particularly * for blocks that are different between the two chip families. * All BCM1480-specific symbols have _BCM1480_ in their names, * and all BCM1250-specific and "base" functions that are common in * both chips have no special names (this is for compatibility with * older include files). Therefore, if you're working with the * SCD, which is very different on each chip, A_SCD_xxx implies * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 * version. ********************************************************************* / / ********************************************************************* * Memory Controller Registers (Section 6) ********************************************************************* / #define A_BCM1480_MC_BASE_0 0x0010050000 #define A_BCM1480_MC_BASE_1 0x0010051000 #define A_BCM1480_MC_BASE_2 0x0010052000 #define A_BCM1480_MC_BASE_3 0x0010053000 #define BCM1480_MC_REGISTER_SPACING 0x1000 #define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)BCM1480_MC_REGISTER_SPACING) #define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg)) #define R_BCM1480_MC_CONFIG 0x0000000100 #define R_BCM1480_MC_CS_START 0x0000000120 #define R_BCM1480_MC_CS_END 0x0000000140 #define S_BCM1480_MC_CS_STARTEND 24 #define R_BCM1480_MC_CS01_ROW0 0x0000000180 #define R_BCM1480_MC_CS01_ROW1 0x00000001A0 #define R_BCM1480_MC_CS23_ROW0 0x0000000200 #define R_BCM1480_MC_CS23_ROW1 0x0000000220 #define R_BCM1480_MC_CS01_COL0 0x0000000280 #define R_BCM1480_MC_CS01_COL1 0x00000002A0 #define R_BCM1480_MC_CS23_COL0 0x0000000300 #define R_BCM1480_MC_CS23_COL1 0x0000000320 #define R_BCM1480_MC_CSX_BASE 0x0000000180 #define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE / #define R_BCM1480_MC_CSX_ROW1 0x0000000020 / relative to CSX_BASE / #define R_BCM1480_MC_CSX_COL0 0x0000000100 / relative to CSX_BASE / #define R_BCM1480_MC_CSX_COL1 0x0000000120 / relative to CSX_BASE / #define BCM1480_MC_CSX_SPACING 0x0000000080 / CS23 relative to CS01 / #define R_BCM1480_MC_CS01_BA 0x0000000380 #define R_BCM1480_MC_CS23_BA 0x00000003A0 #define R_BCM1480_MC_DRAMCMD 0x0000000400 #define R_BCM1480_MC_DRAMMODE 0x0000000420 #define R_BCM1480_MC_CLOCK_CFG 0x0000000440 #define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG #define R_BCM1480_MC_TEST_DATA 0x0000000480 #define R_BCM1480_MC_TEST_ECC 0x00000004A0 #define R_BCM1480_MC_TIMING1 0x00000004C0 #define R_BCM1480_MC_TIMING2 0x00000004E0 #define R_BCM1480_MC_DLL_CFG 0x0000000500 #define R_BCM1480_MC_DRIVE_CFG 0x0000000520 #if SIBYTE_HDR_FEATURE(1480, PASS2) #define R_BCM1480_MC_ODT 0x0000000460 #define R_BCM1480_MC_ECC_STATUS 0x0000000540 #endif / Global registers (single instance) / #define A_BCM1480_MC_GLB_CONFIG 0x0010054100 #define A_BCM1480_MC_GLB_INTLV 0x0010054120 #define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140 #define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160 #define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180 #define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0 / ********************************************************************* * L2 Cache Control Registers (Section 5) ********************************************************************* / #define A_BCM1480_L2_BASE 0x0010040000 #define A_BCM1480_L2_READ_TAG 0x0010040018 #define A_BCM1480_L2_ECC_TAG 0x0010040038 #define A_BCM1480_L2_MISC0_VALUE 0x0010040058 #define A_BCM1480_L2_MISC1_VALUE 0x0010040078 #define A_BCM1480_L2_MISC2_VALUE 0x0010040098 #define A_BCM1480_L2_MISC_CONFIG 0x0010040040 / x040 / #define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 / x060 / #define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE \| (((x)&0xF) << 12)) #define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 / x080 / #define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 / x0A0 / #define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 \| (((x)&0xF) << 12)) #define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 \| (((x)&0xF) << 12)) #define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 \| (((~x)&0xF) << 12)) #define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 \| (((~x)&0xF) << 12)) #define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 / x100 / #define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 / x120 / #define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 / x140 / #define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 / x160 / #define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 / xxC0 / #define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 / xxE0 / #define A_BCM1480_L2_WAY_ENABLE(A, banks) (A \| (((~(banks))&0x0F) << 8)) #define A_BCM1480_L2_BANK_BASE 0x00D0300000 #define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE \| (((b)&0x7)<<17)) #define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000 / ********************************************************************* * PCI-X Interface Registers (Section 7) ********************************************************************* / #define A_BCM1480_PCI_BASE 0x0010061400 #define A_BCM1480_PCI_RESET 0x0010061400 #define A_BCM1480_PCI_DLL 0x0010061500 #define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000 / ********************************************************************* * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6) ********************************************************************* / / No register changes with Rev.C BCM1250, but one additional MAC / #define A_BCM1480_MAC_BASE_2 0x0010066000 #ifndef A_MAC_BASE_2 #define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2 #endif #define A_BCM1480_MAC_BASE_3 0x0010067000 #define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3 #define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038 #ifndef R_MAC_DMA_OODPKTLOST #define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST #endif / ********************************************************************* * DUART Registers (Section 14) ********************************************************************* / / No significant differences from BCM1250, two DUARTs / / Conventions, per user manual: * DUART generic, channels A,B,C,D * DUART0 implementing channels A,B * DUART1 inplementing channels C,D / #define BCM1480_DUART_NUM_PORTS 4 #define A_BCM1480_DUART0 0x0010060000 #define A_BCM1480_DUART1 0x0010060400 #define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1) #define BCM1480_DUART_CHANREG_SPACING 0x100 #define A_BCM1480_DUART_CHANREG(chan, reg) \ (A_BCM1480_DUART(chan) + \ BCM1480_DUART_CHANREG_SPACING (((chan) & 1) + 1) + (reg)) #define A_BCM1480_DUART_CTRLREG(chan, reg) \ (A_BCM1480_DUART(chan) + \ BCM1480_DUART_CHANREG_SPACING * 3 + (reg)) #define DUART_IMRISR_SPACING 0x20 #define DUART_INCHNG_SPACING 0x10 #define R_BCM1480_DUART_IMRREG(chan) \ (R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING) #define R_BCM1480_DUART_ISRREG(chan) \ (R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING) #define R_BCM1480_DUART_INCHREG(chan) \ (R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING) #define A_BCM1480_DUART_IMRREG(chan) \ (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan))) #define A_BCM1480_DUART_ISRREG(chan) \ (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan))) #define A_BCM1480_DUART_IN_PORT(chan) \ (A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT)) /* * These constants are the absolute addresses. / #define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400 #define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410 #define A_BCM1480_DUART_STATUS_C 0x0010060420 #define A_BCM1480_DUART_CLK_SEL_C 0x0010060430 #define A_BCM1480_DUART_FULL_CTL_C 0x0010060440 #define A_BCM1480_DUART_CMD_C 0x0010060450 #define A_BCM1480_DUART_RX_HOLD_C 0x0010060460 #define A_BCM1480_DUART_TX_HOLD_C 0x0010060470 #define A_BCM1480_DUART_OPCR_C 0x0010060480 #define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490 #define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500 #define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510 #define A_BCM1480_DUART_STATUS_D 0x0010060520 #define A_BCM1480_DUART_CLK_SEL_D 0x0010060530 #define A_BCM1480_DUART_FULL_CTL_D 0x0010060540 #define A_BCM1480_DUART_CMD_D 0x0010060550 #define A_BCM1480_DUART_RX_HOLD_D 0x0010060560 #define A_BCM1480_DUART_TX_HOLD_D 0x0010060570 #define A_BCM1480_DUART_OPCR_D 0x0010060580 #define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590 #define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600 #define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610 #define A_BCM1480_DUART_ISR_C 0x0010060620 #define A_BCM1480_DUART_IMR_C 0x0010060630 #define A_BCM1480_DUART_ISR_D 0x0010060640 #define A_BCM1480_DUART_IMR_D 0x0010060650 #define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660 #define A_BCM1480_DUART_OPCR_CD 0x0010060670 #define A_BCM1480_DUART_IN_PORT_CD 0x0010060680 #define A_BCM1480_DUART_ISR_CD 0x0010060690 #define A_BCM1480_DUART_IMR_CD 0x00100606A0 #define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0 #define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0 #define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0 #define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0 / ********************************************************************* * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16) ********************************************************************* / #define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58 #define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68 / ********************************************************************* * GPIO Registers (Section 17) ********************************************************************* / / One additional GPIO register, placed _before_ the BCM1250's GPIO block base / #define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78 #define R_BCM1480_GPIO_INT_ADD_TYPE (-8) #define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE #define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE / ********************************************************************* * SMBus Registers (Section 18) ********************************************************************* / / No changes from BCM1250 / / ********************************************************************* * Timer Registers (Sections 4.6) ********************************************************************* / / BCM1480 has two additional watchdogs / / Watchdog timers / #define A_BCM1480_SCD_WDOG_2 0x0010022050 #define A_BCM1480_SCD_WDOG_3 0x0010022150 #define BCM1480_SCD_NUM_WDOGS 4 #define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)0x1000 + ((w)&1)0x100) #define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r)) #define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050 #define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058 #define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060 #define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150 #define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158 #define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160 / BCM1480 has two additional compare registers / #define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT #define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00 #define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0 #define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1 #define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10 #define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18 / ********************************************************************* * System Control Registers (Section 4.2) ********************************************************************* / / Scratch register in different place / #define A_BCM1480_SCD_SCRATCH 0x100200A0 / ********************************************************************* * System Address Trap Registers (Section 4.9) ********************************************************************* / / No changes from BCM1250 / / ********************************************************************* * System Interrupt Mapper Registers (Sections 4.3-4.5) ********************************************************************* / #define A_BCM1480_IMR_CPU0_BASE 0x0010020000 #define A_BCM1480_IMR_CPU1_BASE 0x0010022000 #define A_BCM1480_IMR_CPU2_BASE 0x0010024000 #define A_BCM1480_IMR_CPU3_BASE 0x0010026000 #define BCM1480_IMR_REGISTER_SPACING 0x2000 #define BCM1480_IMR_REGISTER_SPACING_SHIFT 13 #define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)BCM1480_IMR_REGISTER_SPACING) #define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg)) /* Most IMR registers are 128 bits, implemented as non-contiguous 64-bit registers high (_H) and low (_L) / #define BCM1480_IMR_HL_SPACING 0x1000 #define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010 #define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018 #define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020 #define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028 #define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038 #define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040 #define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048 #define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0 #define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8 #define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0 #define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0 #define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8 #define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0 #define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100 #define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8 #define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200 #define BCM1480_IMR_INTERRUPT_MAP_COUNT 64 #define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010 #define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018 #define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020 #define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028 #define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038 #define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040 #define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100 #define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200 #define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000 #define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100 #define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200 #define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300 #define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100 #define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \ (cpu)BCM1480_IMR_ALIAS_MAILBOX_SPACING) #define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg)) #define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 #define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* * these macros work together to build the address of a mailbox * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2) * for mbox_0_set_cpu2 returns 0x00100240C8 / #define R_BCM1480_IMR_MAILBOX_CPU 0x00 #define R_BCM1480_IMR_MAILBOX_SET 0x08 #define R_BCM1480_IMR_MAILBOX_CLR 0x10 #define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20 #define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \ (A_BCM1480_IMR_CPU0_BASE + \ (num R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \ (cpu * BCM1480_IMR_REGISTER_SPACING) + \ (R_BCM1480_IMR_MAILBOX_0_CPU + reg)) /* ********************************************************************* * System Performance Counter Registers (Section 4.7) ********************************************************************* / / BCM1480 has four more performance counter registers, and two control registers. / #define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0 #define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0 #define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0 #define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8 #define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1 #define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0 #define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1 #define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2 #define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3 #define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0 #define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8 #define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 #define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 #define BCM1480_SCD_NUM_PERF_CNT 8 #define BCM1480_SCD_PERF_CNT_SPACING 8 #define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(nBCM1480_SCD_PERF_CNT_SPACING)) /* ********************************************************************* * System Bus Watcher Registers (Section 4.8) ********************************************************************* / / Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. / #define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8 / ********************************************************************* * System Debug Controller Registers (Section 19) ********************************************************************* / / Same as 1250 / / ********************************************************************* * System Trace Unit Registers (Sections 4.10) ********************************************************************* / / Same as 1250 / / ********************************************************************* * Data Mover DMA Registers (Section 10.7) ********************************************************************* / / Same as 1250 / / ********************************************************************* * HyperTransport Interface Registers (Section 8) ********************************************************************* / #define BCM1480_HT_NUM_PORTS 3 #define BCM1480_HT_PORT_SPACING 0x800 #define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)BCM1480_HT_PORT_SPACING)) #define A_BCM1480_HT_PORT0_HEADER 0x00FE000000 #define A_BCM1480_HT_PORT1_HEADER 0x00FE000800 #define A_BCM1480_HT_PORT2_HEADER 0x00FE001000 #define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000 /* ********************************************************************* * Node Controller Registers (Section 9) ********************************************************************* / #define A_BCM1480_NC_BASE 0x00DFBD0000 #define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000 #define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020 #define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040 #define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060 #define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080 #define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0 #define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0 #define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0 #define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100 #define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120 #define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140 #define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200 #define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220 #define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240 #define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260 #define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280 #define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0 #define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0 #define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0 #define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300 #define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320 #define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000 #define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020 #define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040 #define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060 #define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080 / ********************************************************************* * H&R Block Configuration Registers (Section 12.4) ********************************************************************* / #define A_BCM1480_HR_BASE_0 0x00DF820000 #define A_BCM1480_HR_BASE_1 0x00DF8A0000 #define A_BCM1480_HR_BASE_2 0x00DF920000 #define BCM1480_HR_REGISTER_SPACING 0x80000 #define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)BCM1480_HR_REGISTER_SPACING)) #define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg)) #define R_BCM1480_HR_CFG 0x0000000000 #define R_BCM1480_HR_MAPPING 0x0000010010 #define BCM1480_HR_RULE_SPACING 0x0000000010 #define BCM1480_HR_NUM_RULES 16 #define BCM1480_HR_OP_OFFSET 0x0000000100 #define BCM1480_HR_TYPE_OFFSET 0x0000000108 #define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)BCM1480_HR_RULE_SPACING)) #define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)BCM1480_HR_RULE_SPACING)) #define BCM1480_HR_LEAF_SPACING 0x0000000010 #define BCM1480_HR_NUM_LEAVES 10 #define BCM1480_HR_LEAF_OFFSET 0x0000000300 #define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)BCM1480_HR_LEAF_SPACING)) #define R_BCM1480_HR_EX_LEAF0 0x00000003A0 #define BCM1480_HR_PATH_SPACING 0x0000000010 #define BCM1480_HR_NUM_PATHS 16 #define BCM1480_HR_PATH_OFFSET 0x0000000600 #define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)BCM1480_HR_PATH_SPACING)) #define R_BCM1480_HR_PATH_DEFAULT 0x0000000700 #define BCM1480_HR_ROUTE_SPACING 8 #define BCM1480_HR_NUM_ROUTES 512 #define BCM1480_HR_ROUTE_OFFSET 0x0000001000 #define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)BCM1480_HR_ROUTE_SPACING)) / checked to here - ehs / / ********************************************************************* * Packet Manager DMA Registers (Section 12.5) ********************************************************************* / #define A_BCM1480_PM_BASE 0x0010056000 #define A_BCM1480_PMI_LCL_0 0x0010058000 #define A_BCM1480_PMO_LCL_0 0x001005C000 #define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE) #define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE) #define BCM1480_PM_LCL_REGISTER_SPACING 0x100 #define BCM1480_PM_NUM_CHANNELS 32 #define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)BCM1480_PM_LCL_REGISTER_SPACING)) #define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg)) #define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)BCM1480_PM_LCL_REGISTER_SPACING)) #define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg)) #define BCM1480_PM_INT_PACKING 8 #define BCM1480_PM_INT_FUNCTION_SPACING 0x40 #define BCM1480_PM_INT_NUM_FUNCTIONS 3 / * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n) / #define R_BCM1480_PM_BASE_SIZE 0x0000000000 #define R_BCM1480_PM_CNT 0x0000000008 #define R_BCM1480_PM_PFCNT 0x0000000010 #define R_BCM1480_PM_LAST 0x0000000018 #define R_BCM1480_PM_PFINDX 0x0000000020 #define R_BCM1480_PM_INT_WMK 0x0000000028 #define R_BCM1480_PM_CONFIG0 0x0000000030 #define R_BCM1480_PM_LOCALDEBUG 0x0000000078 #define R_BCM1480_PM_CACHEABILITY 0x0000000080 / PMI only / #define R_BCM1480_PM_INT_CNFG 0x0000000088 #define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090 #define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 / PMI only / #define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 / PMO only / / * Global Registers (Not Channelized) / #define A_BCM1480_PMI_GLB_0 0x0010056000 #define A_BCM1480_PMO_GLB_0 0x0010057000 / * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0 / #define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 / PMO only / #define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING) / * Interrupt mapping registers / #define A_BCM1480_PMI_INT_0 0x0010056800 #define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8)) #define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE) #define A_BCM1480_PMO_INT_0 0x0010057800 #define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8)) #define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE) / * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0 / #define R_BCM1480_PM_INT_ST 0x0000000000 #define R_BCM1480_PM_INT_MSK 0x0000000040 #define R_BCM1480_PM_INT_CLR 0x0000000080 #define R_BCM1480_PM_MRGD_INT 0x00000000C0 / * Debug registers (global) / #define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000 #define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8 #define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8 #define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000 #define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8 #define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8 / ********************************************************************* * Switch performance counters ********************************************************************* / #define A_BCM1480_SWPERF_CFG 0xdfb91800 #define A_BCM1480_SWPERF_CNT0 0xdfb91880 #define A_BCM1480_SWPERF_CNT1 0xdfb91888 #define A_BCM1480_SWPERF_CNT2 0xdfb91890 #define A_BCM1480_SWPERF_CNT3 0xdfb91898 / ********************************************************************* * Switch Trace Unit ********************************************************************* / #define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000 #define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100 #define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108 #define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200 #define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208 #define A_BCM1480_SWTRC_EVENT_0 0xDFB91300 #define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400 #define A_BCM1480_SWTRC_CFG 0xDFB91500 #define A_BCM1480_SWTRC_READ 0xDFB91508 #define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000 #define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)8)) #define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)8)) #define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)8)) #define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)16)) #define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)16)) #define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)16)) #define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)16)) /* ********************************************************************* * High-Speed Port Registers (Section 13) ********************************************************************* / #define A_BCM1480_HSP_BASE_0 0x00DF810000 #define A_BCM1480_HSP_BASE_1 0x00DF890000 #define A_BCM1480_HSP_BASE_2 0x00DF910000 #define BCM1480_HSP_REGISTER_SPACING 0x80000 #define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)BCM1480_HSP_REGISTER_SPACING)) #define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg)) #define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000 #define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008 #define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010 #define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018 #define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020 #define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028 #define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200 #define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208 #define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800 #define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808 #define R_BCM1480_HSP_RX_TEST 0x0000000810 #define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818 #define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820 #define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828 #define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830 #define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838 #define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050 #define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058 #define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8(idx)) / XXX Following registers were shuffled. Renamed/renumbered per errata. / #define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078 #define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080 #define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088 #define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090 #define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098 #define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8 #define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8 #define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8 #define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8 #define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8(idx)) #define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0 #define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8 #define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100 #define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108 #define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110 #define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118 #define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120 #define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000 #define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008 #define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050 #define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058 #define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8(idx)) #define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078 #define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080 #define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8(idx)) #define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0 #define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8(idx)) #define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100 #define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108 #define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200 #define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208 #define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800 #define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808 #define R_BCM1480_HSP_TX_TEST 0x0000040810 #define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840 #define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848 #define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850 #define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860 #define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868 #define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870 #define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878 #define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880 #define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888 #define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400 #define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8(x)) /* ********************************************************************* * Physical Address Map (Table 10 and Figure 7) ********************************************************************* / #define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) #define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((25610241024)) #define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) #define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) #define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000) #define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000) #define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000) #define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000) #define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000) #define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000) #define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000) #define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000) #define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000) #define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000) #define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) #define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) #define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000) #define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000) #define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000) #define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000) #define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000) #define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000) #define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) #define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) #define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) #define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) #define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) #define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000) #define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) #define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) #define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) #define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) #define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508102410241024)) #define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000) #define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000) #define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000) #define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000) #define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000) /* ********************************************************************* * L2 Cache as RAM (Table 54) ********************************************************************* / #define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) #define BCM1480_PHYS_L2CACHE_NUM_WAYS 8 #define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000) #define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000) #define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000) #define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000) #define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000) #define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000) #define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000) #define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000) #define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000) #endif / _BCM1480_REGS_H */

| ver. 1.4 | Github | . | PHP 7.4.3-4ubuntu2.24 | Генерация страницы: 0.01 | proxy | phpinfo | Настройка