Файловый менеджер - Редактировать - /usr/src/linux-headers-5.4.0-200/arch/mips/include/asm/sgi/ioc.h
Назад
/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * ioc.h: Definitions for SGI I/O Controller * * Copyright (C) 1996 David S. Miller * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle * Copyright (C) 2001, 2003 Ladislav Michl */ #ifndef _SGI_IOC_H #define _SGI_IOC_H #include <linux/types.h> #include <asm/sgi/pi1.h> /* * All registers are 8-bit wide aligned on 32-bit boundary. Bad things * happen if you try word access them. You have been warned. */ struct sgioc_uart_regs { u8 _ctrl1[3]; volatile u8 ctrl1; u8 _data1[3]; volatile u8 data1; u8 _ctrl2[3]; volatile u8 ctrl2; u8 _data2[3]; volatile u8 data2; }; struct sgioc_keyb_regs { u8 _data[3]; volatile u8 data; u8 _command[3]; volatile u8 command; }; struct sgint_regs { u8 _istat0[3]; volatile u8 istat0; /* Interrupt status zero */ #define SGINT_ISTAT0_FFULL 0x01 #define SGINT_ISTAT0_SCSI0 0x02 #define SGINT_ISTAT0_SCSI1 0x04 #define SGINT_ISTAT0_ENET 0x08 #define SGINT_ISTAT0_GFXDMA 0x10 #define SGINT_ISTAT0_PPORT 0x20 #define SGINT_ISTAT0_HPC2 0x40 #define SGINT_ISTAT0_LIO2 0x80 u8 _imask0[3]; volatile u8 imask0; /* Interrupt mask zero */ u8 _istat1[3]; volatile u8 istat1; /* Interrupt status one */ #define SGINT_ISTAT1_ISDNI 0x01 #define SGINT_ISTAT1_PWR 0x02 #define SGINT_ISTAT1_ISDNH 0x04 #define SGINT_ISTAT1_LIO3 0x08 #define SGINT_ISTAT1_HPC3 0x10 #define SGINT_ISTAT1_AFAIL 0x20 #define SGINT_ISTAT1_VIDEO 0x40 #define SGINT_ISTAT1_GIO2 0x80 u8 _imask1[3]; volatile u8 imask1; /* Interrupt mask one */ u8 _vmeistat[3]; volatile u8 vmeistat; /* VME interrupt status */ u8 _cmeimask0[3]; volatile u8 cmeimask0; /* VME interrupt mask zero */ u8 _cmeimask1[3]; volatile u8 cmeimask1; /* VME interrupt mask one */ u8 _cmepol[3]; volatile u8 cmepol; /* VME polarity */ u8 _tclear[3]; volatile u8 tclear; u8 _errstat[3]; volatile u8 errstat; /* Error status reg, reserved on INT2 */ u32 _unused0[2]; u8 _tcnt0[3]; volatile u8 tcnt0; /* counter 0 */ u8 _tcnt1[3]; volatile u8 tcnt1; /* counter 1 */ u8 _tcnt2[3]; volatile u8 tcnt2; /* counter 2 */ u8 _tcword[3]; volatile u8 tcword; /* control word */ #define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ #define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ #define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ #define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ #define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ #define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ #define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ #define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ #define SGINT_TCWORD_CMASK 0x30 /* Command mask */ #define SGINT_TCWORD_CLAT 0x00 /* Latch command */ #define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ #define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ #define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ #define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ #define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ #define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ #define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ }; /* * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz */ #define SGINT_TIMER_CLOCK 1000000 /* * This is the constant we're using for calibrating the counter. */ #define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255) /* We need software copies of these because they are write only. */ extern u8 sgi_ioc_reset, sgi_ioc_write; struct sgioc_regs { struct pi1_regs pport; u32 _unused0[2]; struct sgioc_uart_regs uart; struct sgioc_keyb_regs kbdmouse; u8 _gcsel[3]; volatile u8 gcsel; u8 _genctrl[3]; volatile u8 genctrl; u8 _panel[3]; volatile u8 panel; #define SGIOC_PANEL_POWERON 0x01 #define SGIOC_PANEL_POWERINTR 0x02 #define SGIOC_PANEL_VOLDNINTR 0x10 #define SGIOC_PANEL_VOLDNHOLD 0x20 #define SGIOC_PANEL_VOLUPINTR 0x40 #define SGIOC_PANEL_VOLUPHOLD 0x80 u32 _unused1; u8 _sysid[3]; volatile u8 sysid; #define SGIOC_SYSID_FULLHOUSE 0x01 #define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) #define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) u32 _unused2; u8 _read[3]; volatile u8 read; u32 _unused3; u8 _dmasel[3]; volatile u8 dmasel; #define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */ #define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ #define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ #define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ #define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ #define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ u32 _unused4; u8 _reset[3]; volatile u8 reset; #define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */ #define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */ #define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */ #define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */ #define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ #define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */ u32 _unused5; u8 _write[3]; volatile u8 write; #define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */ #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ #define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */ #define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */ #define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */ #define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */ u32 _unused6; struct sgint_regs int3; u32 _unused7[16]; volatile u32 extio; /* FullHouse only */ #define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */ #define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */ #define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */ #define EXTIO_S0_RETRACE 0x1000 #define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */ #define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */ #define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */ #define EXTIO_SG_RETRACE 0x0100 #define EXTIO_GIO_33MHZ 0x0080 #define EXTIO_EISA_BUSERR 0x0040 #define EXTIO_MC_BUSERR 0x0020 #define EXTIO_HPC3_BUSERR 0x0010 #define EXTIO_S0_STAT_1 0x0008 #define EXTIO_S0_STAT_0 0x0004 #define EXTIO_SG_STAT_1 0x0002 #define EXTIO_SG_STAT_0 0x0001 }; extern struct sgioc_regs *sgioc; extern struct sgint_regs *sgint; #endif
| ver. 1.4 |
Github
|
.
| PHP 7.4.3-4ubuntu2.24 | Генерация страницы: 0 |
proxy
|
phpinfo
|
Настройка